Before I begin I just want to define a few terms I will refer to using the Spellbinders die cuts and the wizard.
Definitions:
a) stack: the combination of accessories for cutting or embossing
b) plate: the thick white plastic board
c) tan mat: rubber mat used for embossing
d) cardstock: paper
e) nestabilities: metal dies used for cutting
f) shim: the thin white plastic board used to assist in the cutting process
1) Cut the rectangle using your wizard or cuttlebug. Stack: plate, cardstock, nestabilities, shim and plate.
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj0p8vb62xr9YKcjWPAkOVII8CzualWpDsz3C3M5zTkXkpJt030Qo3fzsPy1vcdJhc40GABTWbUTAjDtkilZCezF1A4XRPm9gNuNcCFXekJdylI1CnRghB7VSJPS9r1CDIDT3pdfJfcS50/s400/-2020.jpg)
2) Line up the nestabilities. Using the largest rectangle from the "classic rectangle, small" paired with the "small labels" nestabilities I was able to create a unique frame and corner for my stamped image.
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjY5kqaC_hzd1YRFhCOCucAd1QC0zQkoCUyLbLns_4YtCXutCq2x7HDc7rQtqgj55cSAN20_Z_nyiWEVpDp_rpxfRMlvtnFuMZWJutoXcO7Ds8J3YQK4eLvf3NJLX-KNMh_xd1Vp8pkYY8/s400/-2010.jpg)
Now stack: plate, tan mat, cardstock, nestabilities, and plate. Run through the Wizard.
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEit8hMQwLYOU8rgDP9H9urUqzdSGT31tkXW3Dhr3Q-awWJLUjf_LNr906UywJULpRYw_A2slunDFroOkpxcgiZYW50vohd_22tyNASagAoN-YBN4DhXLJqO3Cf9lnhVLs-twYENc2NgF5s/s400/-2022.jpg)
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg_4kKIw43Z5ucKcYB9OOMKrhnhD4tLQI61GadaC_kL_GbX_cS3tcKLphEaP0Az7HPGIubQAyqhnolZG7np562zt3pmGRhmdAqzXzHUYkq6hdUzdJ9dtjIcUWm92_ugvABWyppH8phfC5g/s400/-2025.jpg)
And this is the result!
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgQg05VW8NVdbMYSgluA7yZKWyppWnKvVSNJQP3jmnyBkAsc60lKRwAT8fXOo7Gcl-2l2OtzotsvcbDC_KSZo2HC8PU3B3067MPGJ9eLBgWCmWP9snRSfSS34T3GBO6Pip4zxe63ETLp4E/s400/-2021.jpg)
I just love how it has framed this image!
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgKt-kMkITnfrEuC25TEc8qaB9UVJmMUqgiYKAsatpvY9cYu_WuWVH5IPpez44LTq3sl31K8FIYVyEJPDqOhGY6NZ-13Z351mXjxHJ3bDUMQ_V831CFXlwC7Vpv_WtAIlVdo8CGoNPaGKY/s400/-1981.jpg)
Simple right?? Have fun creating your unique borders using a combination of nestabilities.
Have a terrific day. Stay tuned for a card that I created for a fun challenge.
Alli
5 comments:
Brilliant!! Thanks for sharing!!
What a COOL technique, Alli! That's awesome! Thanks for sharing!
Ahha! You are brilliant Alli! That is such a classy look! Thanks for sharing!
So awesome!! I've been looking for other ways to use those dies!!
very personal looking good job.
Post a Comment